Enable single sign on for admin users and developers

Introduction

Single sign-on (SSO) enables users to access multiple applications using one set of login credentials, reducing the burden of password management and improving security. SSO is relevant for businesses of all sizes, streamlining access control and improving user experience. Regardless of your organization’s size, implementing SSO can enhance security, simplify access to enterprise resources, and strengthen user satisfaction.

In this section, you’ll learn how to enable single sign-on for admin users and developers in the Tyk Enterprise Developer portal with 3rd party identity providers (IDPs).

Prerequisites

• A Tyk Enterprise portal installation
• Supported 3rd party identity provider up and running

Configure Tyk Enterprise Developer portal for SSO

Configuration on the portal side is quite straightforward. You need to specify the portal SSO API secret that acts as a credential for the APIs that are used by TIB for communication with the portal within Single Sign-On flow. You can use any value for the portal SSO API secret, but it should be consistent with TIB configuration.

To specify the portal SSO API secret, add the PORTAL_API_SECRET variable to the portal .env file:

PORTAL_API_SECRET=your-portal-api-secret

If you use the Tyk helm chart, it is required to add the PORTAL_API_SECRET to extraEnvs:

extraEnvs:
- name: PORTAL_API_SECRET
  value: "your-portal-api-secret"

Configure Tyk Identity Broker to work with Tyk Enterprise Developer Portal

The Tyk Enterprise Developer portal uses the Tyk Identity Broker to work with various Identity Management Systems, such as LDAP, Social OAuth (e.g., GPlus, Twitter, GitHub), or Basic Authentication providers. Therefore, to configure Single Sign-On for the portal, you need to install and configure Tyk Identity Broker first. Follow these steps to achieve this:

Install Tyk Identity Broker

Please refer to the TIB installation guide documentation for different installation options:

• Docker
• packages
• Tyk helm chart

Specify TIB settings to work with the Tyk Enterprise Developer portal

Docker or packages

Create tib.conf file for the Docker installation or if you use packages to deploy TIB:

{
    "Secret":"test-secret",
    "HttpServerOptions":{
        "UseSSL":false,
        "CertFile":"./certs/server.pem",
        "KeyFile":"./certs/server.key"
    },
    "SSLInsecureSkipVerify": true,
	"BackEnd": {
		"Name": "in_memory",
		"IdentityBackendSettings": {
			"Hosts" : {
				"localhost": "6379"
			},
			"Password": "",
			"Database": 0,
			"EnableCluster": false,
			"MaxIdle": 1000,
			"MaxActive": 2000
		}
	},
    "TykAPISettings":{
        "DashboardConfig":{
            "Endpoint":"https://{your portal host}",
            "Port":"{your portal port}",
            "AdminSecret":"{portal-api-secret}"
        }
    }
}

Setting reference:

• TykAPISettings.DashboardConfig.Endpoint is the Developer portal url. Pay attention if any of the elements (TIB or Portal) is running on containers.
• TykAPISettings.DashboardConfig.Port is the Developer portal port.
• TykAPISettings.DashboardConfig.AdminSecret is PortalAPISecret in the configuration file of the Developer portal.

The full reference for the configuration file is in the TIB section of the documentation.

Helm charts

If you wish ot deploy TIB in Kubernetes via Tyk helm chart, you need to specify TIB config as extraVars:

extraEnvs:
  - name: TYK_IB_HTTPSERVEROPTIONS_CERTFILE
    value: "./certs/server.pem"
  - name: TYK_IB_HTTPSERVEROPTIONS_KEYFILE
    value: "./certs/server.key"
  - name: TYK_IB_SSLINSECURESKIPVERIFY
    value: "true"
  - name: TYK_IB_BACKEND_NAME
    value: "in_memory"
  - name: TYK_IB_BACKEND_IDENTITYBACKENDSETTINGS_HOSTS
    value: "redis.tyk-cp:6379"
  - name: TYK_IB_BACKEND_IDENTITYBACKENDSETTINGS_PASSWORD
    value: ""
  - name: TYK_IB_BACKEND_IDENTITYBACKENDSETTINGS_DATABASE
    value: "0"
  - name: TYK_IB_BACKEND_IDENTITYBACKENDSETTINGS_ENABLECLUSTER
    value: "false"
  - name: TYK_IB_BACKEND_IDENTITYBACKENDSETTINGS_MAXIDLE
    value: "1000"
  - name: TYK_IB_BACKEND_IDENTITYBACKENDSETTINGS_MAXACTIVE
    value: "2000"
  - name: TYK_IB_TYKAPISETTINGS_DASHBOARDCONFIG_ENDPOINT
    value: "https://{your portal host}"
  - name: TYK_IB_TYKAPISETTINGS_DASHBOARDCONFIG_PORT
    value: "{your portal port}"
  - name: TYK_IB_TYKAPISETTINGS_DASHBOARDCONFIG_ADMINSECRET
    value: "{portal-api-secret}"

The full reference for the configuration file is in the TIB section of the documentation.

Configure Single Sign-On for admin users and developers

What is the Tyk Identity Broker profile

The Tyk Identity Broker (TIB) uses profiles to define details related to the identity provider such as its type and access credentials, and instructs TIB on how to treat users that try log in with that provider. In this guide, you will create two TIB profiles for admins users and developers. This allows you to have different identity providers for admins and developers as well as for internal and external users.

Depending on your installation options for TIB, you need to specify profiles via a json file (for Docker or packages) or via a ConfigMap (for Tyk Helm Chart).

profiles.json for Docker or packages installation

Here is an example of profiles.json file for Docker or packages installation:

[
  {
    "ActionType": "GenerateOrLoginUserProfile",
    "ID": "{ID of your TIB profile}",
    "OrgID": "0",
    "IdentityHandlerConfig": {
      "DashboardCredential": "{portal API secret}"
    },
    "ProviderConfig": {
      "CallbackBaseURL": "http://{TIB host}:{TIB port}",
      "FailureRedirect": "http://{portal host}:{portal port}/?fail=true",
      "UseProviders": [
        {
          "Name": "openid-connect",
          "Key": "{oAuth2.0 key}",
          "Secret": "{oAuth2.0 secret}",
          "DiscoverURL": "OIDC well-known endpoint"
        }
      ]
    },
    "ProviderName": "SocialProvider",
    "ReturnURL": "http://{portal host}:{portal port}/sso",
    "Type": "redirect"
  },
  {
    "ActionType": "GenerateOrLoginDeveloperProfile",
    "ID": "{ID of your TIB profile}",
    "OrgID": "0",
    "IdentityHandlerConfig": {
      "DashboardCredential": "{portal API secret}"
    },
    "ProviderConfig": {
      "CallbackBaseURL": "http://{TIB host}:{TIB port}",
      "FailureRedirect": "http://{portal host}:{portal port}/?fail=true",
      "UseProviders": [
        {
          "Name": "openid-connect",
          "Key": "{oAuth2.0 key}",
          "Secret": "{oAuth2.0 secret}",
          "DiscoverURL": "OIDC well-known endpoint"
        }
      ]
    },
    "ProviderName": "SocialProvider",
    "ReturnURL": "http://{portal host}:{portal port}/sso",
    "Type": "redirect",
    "DefaultUserGroupID": "1"
  }
]

ConfigMap for Tyk Helm chart installation

Here is an example of ConfigMap for the Tyk Helm chart installation:

apiVersion: v1
kind: ConfigMap
metadata:
  name: tyk-tib-profiles-conf
data:
  profiles.json: |
    [{
      "ActionType": "GenerateOrLoginUserProfile",
      "ID": "{ID of your TIB profile}",
      "OrgID": "0",
      "IdentityHandlerConfig": {
        "DashboardCredential": "{portal API secret}"
      },
      "ProviderConfig": {
        "CallbackBaseURL": "http://{TIB host}:{TIB port}",
        "FailureRedirect": "http://{portal host}:{portal port}/?fail=true",
        "UseProviders": [
          {
            "Name": "openid-connect",
            "Key": "{oAuth2.0 key}",
            "Secret": "{oAuth2.0 secret}",
            "DiscoverURL": "OIDC well-known endpoint"
          }
        ]
      },
      "ProviderName": "SocialProvider",
      "ReturnURL": "http://{portal host}:{portal port}/sso",
      "Type": "redirect"
    },
    {
      "ActionType": "GenerateOrLoginDeveloperProfile",
      "ID": "{ID of your TIB profile}",
      "OrgID": "0",
      "IdentityHandlerConfig": {
        "DashboardCredential": "{portal API secret}"
      },
      "ProviderConfig": {
        "CallbackBaseURL": "http://{TIB host}:{TIB port}",
        "FailureRedirect": "http://{portal host}:{portal port}/?fail=true",
        "UseProviders": [
          {
            "Name": "openid-connect",
            "Key": "{oAuth2.0 key}",
            "Secret": "{oAuth2.0 secret}",
            "DiscoverURL": "OIDC well-known endpoint"
          }
        ]
      },
      "ProviderName": "SocialProvider",
      "ReturnURL": "http://{portal host}:{portal port}/sso",
      "Type": "redirect",
      "DefaultUserGroupID": "1"
    }]    

Configure Single Sign-On for admin users

The Tyk Enterprise Developer portal has two audiences: developers and admins. This section provides guidance on implementing Single Sign-On for admin users. The configuration is rather straightforward, and you need to take these three steps to enable Single Sign-On for admin users in your portal instance:

1. Create a profile for the Tyk Identity Broker (TIB) to work on your identity provider. Make sure the ActionType is equal to “GenerateOrLoginUserProfile”, and OrgID is equal to “0”:

[{
  "ActionType": "GenerateOrLoginUserProfile",
  "ID": "{ID of your TIB profile}",
  "OrgID": "0",
  "IdentityHandlerConfig": {
    "DashboardCredential": "{portal API secret}"
  },
  "ProviderConfig": {
    "CallbackBaseURL": "http://{TIB host}:{TIB port}",
    "FailureRedirect": "http://{portal host}:{portal port}/?fail=true",
    "UseProviders": [
      {
        "Name": "openid-connect",
        "Key": "{oAuth2.0 key}",
        "Secret": "{oAuth2.0 secret}",
        "DiscoverURL": "{OIDC well-known endpoint}"
      }
    ]
  },
  "ProviderName": "SocialProvider",
  "ReturnURL": "http://{portal host}:{portal port}/sso",
  "Type": "redirect"
}]

In the above example, you need to specify the following parameters:

• OrgID must be "0" for being accepted as a provider-admin or super-admin
• ActionType must be equal to "GenerateOrLoginUserProfile"
• IdentityHandlerConfig.DashboardCredential must be equal to the PortalAPISecret field in the configuration file of the portal
• Replace {portal host} and {portal port} with the actual host and port on which your portal instance is running. Also, replace http with https for the respective fields if you use https for your portal instance
• Replace {TIB host} and {TIB port} with the actual host and port on which your TIB instance is running. Also, replace http with https for the respective fields if you use https for your TIB instance
• In the "ID" field, specify an ID of this TIB profile. You can select any value for this field that consists of digits, letters, and special signs, no spaces allowed. It is better to pick a human-readable ID for your profile for better maintainability of the configuration

"UseProviders": [
  {
    "Name": "openid-connect",
    "Key": "{oAuth2.0 key}",
    "Secret": "{oAuth2.0 secret}",
    "Scopes": ["openid", "email"],
    "DiscoverURL": "{OIDC well-known endpoint}"
  }
]

Please refer to the TIB configuration section for step-by-step instructions for setting up the UseProviders section. Any changes to the TIB profile will be effective after restarting your TIB instance.

2. Create a login page for admin users. We don’t supply a login page for Single Sign-On out of the box, so you need to create one. Here is an example of such page that works with a profile for LDAP identity management system:

<html>
    <head>
      <title>Tyk Developer portal login</title>
    </head>
    <body>
      <b> Login to the Developer portal</b>
      <form method="post" action="http://{Tyk Identity Broker host}:{Tyk Identity Broker port}/auth/{profile ID}/ldap">
        username: <input type="text" name="username"/> <br/>
        password: <input type="text" name="password"/> <br/>
        <button type="submit">Login</button>
      </form>
    </body>
</html>

3. Now you should be able to log in to the portal with your identity provider as an admin user

Configure Single Sign-On for developers

This section relates to configuration and settings required to set up Single Sign-On for developers. Configuration for developers is also straight forward. However, for developers there is one additional.

User group mapping

In order to land a developer into the right API Consumer organization, it is necessary to configure the UserGroupMapping in the TIB profile that creates a binding between user groups in your IDP and developer teams in the portal.

To define the user group mapping for your developer audience, you need to add the UserGroupMapping object to the corresponding TIB profile:

  "UserGroupMapping": {
    "{IDP groupA ID}": "{portal teamA ID}",
    "{IDP groupB ID}": "{portal teamB ID}",
    ...
  }

The UserGroupMapping object contains keys that refer to group IDs in your IDP, and the corresponding values are team IDs in the portal. When the Tyk Identity Broker authorizes a user, it searches for a key that matches the user’s group ID in the IDP. If TIB can’t find a matching group ID, it logs the user in to the team with an ID equal to DefaultUserGroupID in the portal (if DefaultUserGroupID is defined). We recommend always defining DefaultUserGroupID and ensuring that it refers to a valid team ID in your portal instance. If DefaultUserGroupID is defined but refers to an invalid team ID, the portal will refuse login attempts.

If no matching group ID is found in the UserGroupMapping object and DefaultUserGroupID isn’t defined, the portal logs in the user to the “Default organization | All users” team with an ID of 1.

To determine whether a developer should be allowed to log in and which team they should be logged into, the portal uses the following algorithm:

Configure profile to enable Single Sign-On for developers

Follow these steps to enable Single Sign-On for developers:

1. Create a profile for the Tyk Identity Broker (TIB) to work on your identity provider. Make sure the ActionType is equal to “GenerateOrLoginUserProfile”, and OrgID is equal to “0”:

[{
  "ActionType": "GenerateOrLoginDeveloperProfile",
  "ID": "{ID of your TIB profile}",
  "OrgID": "0",
  "IdentityHandlerConfig": {
    "DashboardCredential": "{ID of your TIB profile}"
  },
  "ProviderConfig": {
    "CallbackBaseURL": "http://{TIB host}:{TIB port}",
    "FailureRedirect": "http://{portal host}:{portal port}/?fail=true",
    "UseProviders": [
      {
        "Name": "openid-connect",
        "Key": "{oAuth2.0 key}",
        "Secret": "{oAuth2.0 secret}",
        "DiscoverURL": "{OIDC well-known endpoint}"
      }
    ]
  },
  "ProviderName": "SocialProvider",
  "ReturnURL": "http://{portal host}:{portal port}/sso",
  "Type": "redirect",
  "CustomUserGroupField": "{your group ID field}",
  "UserGroupMapping": {
    "{IDP group ID}": "{portal team ID}"
  },
  "DefaultUserGroupID": "{portal team ID}"
}]

In the above example, you need to specify the following parameters:

• OrgID could be anything as its value is ignored;
• ActionType must be equal to "GenerateOrLoginDeveloperProfile"
• IdentityHandlerConfig.DashboardCredential must be equal to the PortalAPISecret field in the configuration file of the portal
• Replace {portal host} and {portal port} with the actual host and port on which your portal instance is running. Also, replace http with https for the respective fields if you use https for your portal instance
• Replace {TIB host} and {TIB port} with the actual host and port on which your TIB instance is running. Also, replace http with https for the respective fields if you use https for your TIB instance
• In the "ID" field, specify an ID of this TIB profile. You can select any value for this field that consists of digits, letters, and special signs, no spaces allowed. It is better to pick a human-readable ID for your profile for better maintainability of the configuration
• CustomUserGroupField must be equal to the JWT claim name that refers to the user group in your IDP
• UserGroupMapping an object that defines relationship between user groups in the IDP and teams in the portal. The optional parameter, if not specified, will cause the portal to rely on the DefaultUserGroupID field to determine which team a developer should log in to. Please refer to the User group mapping section for guidance
• DefaultUserGroupID is the default organization that the portal will use to determine which team a developer should be logged in to if it is not able to find a UserGroupMapping for that developer

"UseProviders": [
  {
    "Name": "openid-connect",
    "Key": "{oAuth2.0 key}",
    "Secret": "{oAuth2.0 secret}",
    "Scopes": ["openid", "email"],
    "DiscoverURL": "{OIDC well-known endpoint}"
  }
]

2. Create a login page for developers. We don’t supply a login page for Single Sign-On out of the box, so you need to create one. Here is an example of such page that works with a profile for LDAP identity management system:

<html>
    <head>
      <title>Tyk Developer portal login</title>
    </head>
    <body>
      <b> Login to the Developer portal</b>
      <form method="post" action="http://{Tyk Identity Broker host}:{Tyk Identity Broker port}/auth/{profile ID}/ldap">
        username: <input type="text" name="username"/> <br/>
        password: <input type="text" name="password"/> <br/>
        <button type="submit">Login</button>
      </form>
    </body>
</html>

3. Now you should be able to log in to the portal with your identity provider as a developer