Rate Limiting

Rate Limiting Overview

You can protect your upstream services from being flooded with requests by configuring rate limiting in Tyk Gateway. Rate limits in Tyk are configured using two parameters: allow rate requests in any per time period (given in seconds).

As explained in the Rate Limiting Concepts section, Tyk supports configuration of rate limits at both the API-Level and Key-Level for different use cases.

The API-Level rate limit takes precedence over Key-Level, if both are configured for a given API, since this is intended to protect your upstream service from becoming overloaded. The Key-Level rate limits provide more granular control for managing access by your API clients.

Configuring the rate limiter at the API-Level

If you want to protect your service with an absolute limit on the rate of requests, you can configure an API-level rate limit. You can do this from the API Designer in Tyk Dashboard as follows:

1. Navigate to the API for which you want to set the rate limit
2. From the Core Settings tab, navigate to the Rate Limiting and Quotas section
3. Ensure that Disable rate limiting is not selected
4. Enter in your Rate and Per (seconds) values
5. Save/Update your changes

Tyk will now accept a maximum of Rate requests in any Per period to the API and will reject further requests with an HTTP 429 Too Many Requests error.

Check out the following video to see this being done.

Configuring the rate limiter at the Key-Level

If you want to restrict an API client to a certain rate of requests to your APIs, you can configure a Key-Level rate limit via a Security Policy. The allowance that you configure in the policy will be consumed by any requests made to APIs using a key generated from the policy. Thus, if a policy grants access to three APIs with rate=15 per=60 then a client using a key generated from that policy will be able to make a total of 15 requests - to any combination of those APIs - in any 60 second period before receiving the HTTP 429 Too Many Requests error.

You can configure this rate limit from the API Designer in Tyk Dashboard as follows:

1. Navigate to the Tyk policy for which you want to set the rate limit
2. Ensure that API(s) that you want to apply rate limits to are selected
3. Under Global Limits and Quota, make sure that Disable rate limiting is not selected and enter your Rate and Per (seconds) values
4. Save/Update the policy

Setting up a Key-Level Per-API rate limit

If you want to restrict API clients to a certain rate of requests for a specific API you will also configure the rate limiter via the security policy. However this time you’ll assign per-API limits. The allowance that you configure in the policy will be consumed by any requests made to that specific API using a key generated from that policy. Thus, if a policy grants access to an API with rate=5 per=60 then three clients using keys generated from that policy will each independently be able to make 5 requests in any 60 second period before receiving the HTTP 429 Too Many Requests error.

You can configure this rate limit from the API Designer in Tyk Dashboard as follows:

1. Navigate to the Tyk policy for which you want to set the rate limit
2. Ensure that API that you want to apply rate limits to is selected
3. Under API Access, turn on Set per API Limits and Quota
4. You may be prompted with “Are you sure you want to disable partitioning for this policy?”. Click CONFIRM to proceed
5. Under Rate Limiting, make sure that Disable rate limiting is not selected and enter your Rate and Per (seconds) values
6. Save/Update the policy

Check out the following video to see this being done.

Setting Rate Limits in the Tyk Community Edition Gateway (CE)

Configuring the rate limiter at the (Global) API-Level

Using the global_rate_limit field in the API definition you can specify the API-level rate limit in the following format: {"rate": 10, "per": 60}.

Configuring the rate limiter on the session object

All actions on the session object must be done via the Gateway API.

1. Ensure that allowance and rate are set to the same value: this should be number of requests to be allowed in a time period, so if you wanted 100 requests every second, set this value to 100.

2. Ensure that per is set to the time limit. Again, as in the above example, if you wanted 100 requests per second, set this value to 1. If you wanted 100 requests per 5 seconds, set this value to 5.

Can I disable the rate limiter?

Yes, the rate limiter can be disabled for an API Definition by selecting Disable Rate Limits in the API Designer, or by setting the value of disable_rate_limit to true in your API definition.

Alternatively, you could also set the values of Rate and Per (Seconds) to be 0 in the API Designer.

Can I set rate limits by IP address?

Not yet, though IP-based rate limiting is possible using custom pre-processor middleware JavaScript that generates tokens based on IP addresses. See our Middleware Scripting Guide for more details.