Legacy Tyk Pro Helm Chart

Last updated: 8 minutes read.

Warning

tyk-pro chart is deprecated. Please use our Tyk Stack helm chart instead.

We recommend all users migrate to the tyk-stack Chart. Please review the Configuration section of the new helm chart and cross-check with your existing configurations while planning for migration.

Introduction

Tyk Helm chart is the preferred (and easiest) way to install Tyk Self-Managed on Kubernetes. The helm chart tyk-helm/tyk-pro will install full Tyk platform with Tyk Manager, Tyk Gateways and Tyk Pump into your Kubernetes cluster. You can also choose to enable the installation of Tyk Operator (to manage your APIs in a declarative way).

Prerequisites

1. Tyk License

If you are evaluating Tyk on Kubernetes, contact us to obtain a temporary licence.

2. Data stores

The following are required for a Tyk Self-Managed installation:

  • Redis - Should be installed in the cluster or reachable from inside the cluster (for SaaS option). You can find instructions for a simple Redis installation bellow.
  • MongoDB or SQL - Should be installed in the cluster or be reachable by the Tyk Manager (for SaaS option).

You can find supported MongoDB and SQL versions here.

Installation instructions for Redis and MongoDB/SQL are detailed below.

3. Helm

Installed Helm 3 Tyk Helm Chart is using Helm v3 version (i.e. not Helm v2).

Installation

As well as our official Helm repo, you can also find it in ArtifactHub.

tyk-pro: This chart deploys our full Tyk platform. The Tyk Gateway is a fully open source Enterprise API Gateway, supporting REST, GraphQL, TCP and gRPC protocols. The Tyk Gateway is provided ‘Batteries-included’, with no feature lockout. It enables organisations and businesses around the world to protect, secure, and process APIs and well as review and audit the consumed apis.

— Open in Artifact Hub

If you are interested in contributing to our charts, suggesting changes, creating PRs or any other way, please use GitHub Tyk-helm-chart repo or contact us in Tyk Community forum or through our sales team.

Add Tyk official Helm repo to your local Helm repository

helm repo add tyk-helm https://helm.tyk.io/public/helm/charts/
helm repo update

Create namespace for your Tyk deployment

kubectl create namespace tyk

Getting the values.yaml of the chart

Before we proceed with installation of the chart you need to set some custom values. To see what options are configurable on a chart and save that options to a custom values.yaml file run:

helm show values tyk-helm/tyk-pro > values.yaml

Installing the data stores

For Redis, MongoDB or SQL you can use these rather excellent charts provided by Bitnami


Redis

helm install tyk-redis bitnami/redis -n tyk --version 19.0.2

Note

Please make sure you are installing Redis versions that are supported by Tyk. Please refer to Tyk docs to get list of supported versions.

Follow the notes from the installation output to get connection details and password.

  Redis(TM) can be accessed on the following DNS names from within your cluster:

    tyk-redis-master.tyk.svc.cluster.local for read/write operations (port 6379)
    tyk-redis-replicas.tyk.svc.cluster.local for read-only operations (port 6379)

  export REDIS_PASSWORD=$(kubectl get secret --namespace tyk tyk-redis -o jsonpath="{.data.redis-password}" | base64 --decode)

The DNS name of your Redis as set by Bitnami is tyk-redis-master.tyk.svc.cluster.local:6379 (Tyk needs the name including the port) You can update them in your local values.yaml file under redis.addrs and redis.pass Alternatively, you can use --set flag to set it in Tyk installation. For example --set redis.pass=$REDIS_PASSWORD


MongoDB

helm install tyk-mongo bitnami/mongodb --set "replicaSet.enabled=true" -n tyk --version 15.1.2

Note

Bitnami MongoDB images is not supported on darwin/arm64 architecture.

Follow the notes from the installation output to get connection details and password. The DNS name of your MongoDB as set with Bitnami is tyk-mongo-mongodb.tyk.svc.cluster.local and you also need to set the authSource parameter to admin. The full mongoURL should be similar to mongoURL: mongodb://root:[email protected]:27017/tyk_analytics?authSource=admin. You can update them in your local values.yaml file under mongo.mongoURL Alternatively, you can use --set flag to set it in your Tyk installation.

Important Note regarding MongoDB

This Helm chart enables the PodDisruptionBudget for MongoDB with an arbiter replica-count of 1. If you intend to perform system maintenance on the node where the MongoDB pod is running and this maintenance requires for the node to be drained, this action will be prevented due the replica count being 1. Increase the replica count in the helm chart deployment to a minimum of 2 to remedy this issue.


Postgres

helm install tyk-postgres bitnami/postgresql --set "auth.database=tyk_analytics" -n tyk --version 14.2.4

Note

Please make sure you are installing PostgreSQL versions that are supported by Tyk. Please refer to Tyk docs to get list of supported versions.

Follow the notes from the installation output to get connection details and password. The DNS name of your Postgres service as set by Bitnami is tyk-postgres-postgresql.tyk.svc.cluster.local. You can update connection details in values.yaml file under postgres.

Quick Redis and MongoDB PoC installation

Warning

Another option for Redis and MongoDB, to get started quickly, is to use our simple-redis and simple-mongodb charts. Please note that these provided charts must not ever be used in production and for anything but a quick start evaluation only. Use external redis or Official Redis Helm chart in any other case. We provide this chart, so you can quickly get up and running, however it is not meant for long term storage of data for example.

helm install redis tyk-helm/simple-redis -n tyk
helm install mongo tyk-helm/simple-mongodb -n tyk

License setting

For the Tyk Self-Managed chart we need to set the license key in your custom values.yaml file under dash.license field or use --set dash.license={YOUR-LICENSE_KEY} with the helm install command.

Tyk Self-Managed licensing allow for different numbers of Gateway nodes to connect to a single Dashboard instance. To ensure that your Gateway pods will not scale beyond your license allowance, please ensure that the Gateway’s resource kind is Deployment and the replica count to your license node limit. By default, the chart is configured to work with a single node license: gateway.kind=Deployment and gateway.replicaCount=1.

Please Note

There may be intermittent issues on the new pods during the rolling update process, when the total number of online gateway pods is more than the license limit with lower amounts of Licensed nodes.

Installing Tyk Self managed

Now we can install the chart using our custom values:

helm install tyk-pro tyk-helm/tyk-pro -f ./values.yaml -n tyk --wait

Important Note regarding MongoDB

The --wait argument is important to successfully complete the bootstrap of your Tyk Manager.

Pump Installation

By default pump installation is disabled. You can enable it by setting pump.enabled to true in values.yaml file. Alternatively, you can use --set pump.enabled=true while doing helm install.

Quick Pump configuration(Supported from tyk helm v0.10.0)

1. Mongo Pump

To configure mongo pump, do following changings in values.yaml file:

  1. Set backend to mongo.
  2. Set connection string in mongo.mongoURL.

2. Postgres Pump

To configure postgres pump, do following changings in values.yaml file:

  1. Set backend to postgres.
  2. Set connection string parameters in postgres section.

Tyk Developer Portal

You can disable the bootstrapping of the Developer Portal by the portal.bootstrap: false in your local values.yaml file.

Using TLS

You can turn on the TLS option under the gateway section in your local values.yaml file which will make your Gateway listen on port 443 and load up a dummy certificate. You can set your own default certificate by replacing the file in the certs/ folder.

Mounting Files

To mount files to any of the Tyk stack components, add the following to the mounts array in the section of that component. For example:

- name: aws-mongo-ssl-cert
 filename: rds-combined-ca-bundle.pem
 mountPath: /etc/certs

Sharding APIs

Sharding is the ability for you to decide which of your APIs are loaded on which of your Tyk Gateways. This option is turned off by default, however, you can turn it on by updating the gateway.sharding.enabled option. Once you do that you will also need to set the gateway.sharding.tags field with the tags that you want that particular Gateway to load. (ex. tags: “external,ingress”.) You can then add those tags to your APIs in the API Designer, under the Advanced Options tab, and the Segment Tags (Node Segmentation) section in your Tyk Dashboard. Check Tyk Gateway Sharding for more details.

Other Tyk Components

Installing Tyk Enterprise Developer Portal

If you are deploying the Tyk Enterprise Developer Portal, set the appropriate values under the enterprisePortal section in your values.yaml. Please visit Tyk Enterprise Developer Portal installation for a step by step guide.

Note: Helm chart supports Enterprise Portal v1.2.0+

Installing Tyk Self-managed Control Plane

If you are deploying the Tyk Control plane, a.k.a MDCB, for a Tyk Multi Data Centre Bridge deployment then you set the mdcb.enabled: true option in the local values.yaml to add of the MDCB component to your installation. Check Tyk Control plane for more configuration details.

This setting enables multi-cluster, multi Data-Centre API management from a single dashboard.

Tyk Identity Broker (TIB)

The Tyk Identity Broker (TIB) is a micro-service portal that provides a bridge between various Identity Management Systems such as LDAP, OpenID Connect providers and legacy Basic Authentication providers, to your Tyk installation. See TIB for more details.

For SSO to Tyk Manager and Tyk developer portal purposes you do not need to install TIB, as its functionality is now part of the Tyk Manager. However, if you want to run it separately (as you used to before this merge) or if you need it as a broker for the Tyk Gateway you can do so.

Once you have installed your Tyk Gateway and Tyk Manager, you can configure TIB by adding its configuration environment variables under the tib.extraEnvs section and updating the profile.json in your configs folder. See our TIB GitHub repo. Once you complete your modifications you can run the following command from the root of the repository to update your helm chart.

helm upgrade tyk-pro values.yaml -n tyk

This chart implies there’s a ConfigMap with a profiles.json definition in it. Please use tib.configMap.profiles value to set the name of this ConfigMap (tyk-tib-profiles-conf by default).

Tyk as an Ingress using Tyk Operator

To set up an ingress for your Tyk Gateways see our Tyk Operator GitHub repository.

Next Steps Tutorials

Follow the Tutorials on the Self-Managed tabs for the following:

  1. Add an API
  2. Create a Security Policy
  3. Create an API Key