You have found an old pageVisit the new Docs
Tyk has its own signed RPMs in a yum repository hosted by the kind folks at packagecloud.io, which makes it easy, safe and secure to install a trusted distribution of the Tyk Gateway stack.
This tutorial will run on an Amazon AWS Red Hat Enterprise Linux 7.1 instance. We will install Tyk Dashboard with all dependencies stored locally.
We’re installing on a
t2.micro because this is a tutorial, you’ll need more RAM and more cores for better performance.
This configuration should also work (with some tweaks) for CentOS.
- Ensure port
3000is open: This is used by the Dashboard to provide the GUI and the Developer Portal
- We are assuming you have already installed the Tyk Gateway and Redis DB using EPEL
Step 1: Set up yum repositories
First, we need to install some software that allows us to use signed packages:
sudo yum install pygpgme yum-utils wget
Next, we need to set up the various repository configurations for Tyk Dashboard and MongoDB:
Step 2: Configure Tyk Dashboard
Create a file named
/etc/yum.repos.d/tyk_tyk-dashboard.repo that contains the repository configuration below.
[tyk_tyk-dashboard] name=tyk_tyk-dashboard baseurl=https://packagecloud.io/tyk/tyk-dashboard/el/7/$basearch repo_gpgcheck=1 enabled=1 gpgkey=http://keyserver.tyk.io/tyk.io.rpm.signing.key https://packagecloud.io/gpg.key sslverify=1 sslcacert=/etc/pki/tls/certs/ca-bundle.crt [tyk_tyk-dashboard-source] name=tyk_tyk-dashboard-source baseurl=https://packagecloud.io/tyk/tyk-dashboard/el/7/SRPMS repo_gpgcheck=1 enabled=1 gpgkey=http://keyserver.tyk.io/tyk.io.rpm.signing.key https://packagecloud.io/gpg.key sslverify=1 sslcacert=/etc/pki/tls/certs/ca-bundle.crt
Step 3: Configure MongoDB
Create a /etc/yum.repos.d/mongodb-org-3.0.repo file so that you can install MongoDB directly, using yum.
[mongodb-org-3.0] name=MongoDB Repository baseurl=https://repo.mongodb.org/yum/redhat/$releasever/mongodb-org/3.0/x86_64/ gpgcheck=0 enabled=1
Finally we’ll need to update our local cache, so run:
sudo yum -q makecache -y --disablerepo='*' --enablerepo='tyk_tyk-dashboard' info zabbix
Step 4: Install packages
We’re ready to go, you can now install the relevant packages using yum:
sudo yum install -y mongodb-org tyk-dashboard
(you may be asked to accept the GPG key for our repos and when the package installs, hit yes to continue)
Step 5: Start MongoDB
In many cases MongoDB not be running, so let’s start that:
sudo service mongod start
Step 6: Configure Tyk Dashboard
We can set the Dashboard up with a similar setup command, the below will get the Dashboard set up for the local instance:
sudo /opt/tyk-dashboard/install/setup.sh --listenport=3000 --redishost=localhost --redisport=6379 --mongo=mongodb://127.0.0.1/tyk_analytics --tyk_api_hostname=$HOSTNAME --tyk_node_hostname=http://localhost --tyk_node_port=8080 --portal_root=/portal --domain="XXX.XXX.XXX.XXX"
Note: Make sure to use the actual DNS hostname or the public IP of your instance as the last parameter.
What we have done here is:
--listenport=3000: Told Tyk Dashboard (and Portal) to listen on port 3000.
--redishost=localhost: Tyk Dashboard should use the local Redis instance.
--redisport=6379: Tyk Dashboard should use the default port.
--domain="XXX.XXX.XXX.XXX": Bind the Dashboard to the IP or DNS hostname of this instance (required).
--mongo=mongodb://127.0.0.1/tyk_analytics: Use the local MongoDB (should always be the same as the Gateway).
--tyk_api_hostname=$HOSTNAME: Tyk Dashboard has no idea what hostname has been given to Tyk, so we need to tell it, in this instance we are just using the local HOSTNAME env variable, but you could set this to the public-hostname/IP of the instance.
--tyk_node_hostname=http://localhost: Tyk Dashboard needs to see a Tyk node in order to create new tokens, so we need to tell it where we can find one, in this case, use the one installed locally.
--tyk_node_port=8080: Tell the Dashboard that the Tyk node it should communicate with is on port 8080.
--portal_root=/portal: We want the Portal to be shown on /portal of whichever domain we set for the Portal.
Step 7: Start Tyk Dashboard
sudo service tyk-dashboard start
Notice how we haven’t actually started the gateway yet, because this is a dashboard install, we need to enter a license first.
Step 8: Enter Dashboard license
You will see a screen asking for a license, enter it in the section marked “Already have a license?” and click
Use this license.
That’s it, your dashboard is now ready to be bootstrapped.
Note: You can bypass this step by adding your license manually to the
/var/opt/tyk-dashboard/tyk_analytics.conffile directly in the field marked
If all is going well, you will be taken to a log in screen – we’ll get to that soon.
Step 9: Restart the Dashboard process
Because we’ve just entered a license via the UI, we need to make sure that these changes get picked up, so to make sure things run smoothly, we restart the dashboard process (you only need to do this once) and (if you have it installed) then start the gateway:
sudo service tyk-dashboard restart
Step 10: Bootstrap the Dashboard with an initial user and organisation
When Tyk Dashboard is created for the first time, it has no initial user base or organisation to add data to, so we need to add this.
The best way to add this data is with the Admin API, to make it really easy we’ve supplied a bootstrap script that will set you up. If you want to customise it, take a look at the file in
Pre-requisites for this command
- This command assumes you are running on a Linux shell such as Bash
- This command assumes you have Python 2.6 or 2.7 installed
To bootstrap your instance:
sudo /opt/tyk-dashboard/install/bootstrap.sh XXX.XXX.XXX.XXX
This command tells the bootstrap script to use the localhost as the base for the API calls, you can run the bootstrap remotely and change the first command line parameter to the DNS hostname of your instance.
You will now be able to log into and test your Tyk instance with the values given to you by the bootstrap script.