You have found an old pageVisit the new Docs
To Install a Tyk Hybrid Gateway, you will need to ensure some basic requirements are met.
- A Docker-enabled host
- Access to the shell of this host
- Port 80, 8080 and 9090 open
Port 80 is required as our Docker Hybrid container runs Nginx on top of Tyk and then proxies to port 80. If you are using our container port 80 should be open.
Port 8080 is required as it is the default port for the Gateway endpoint.
Port 9090 is used for outbound traffic to our Cloud. It is required if you are using a RPC connector. As this is outbound traffic you do not have to open that port on the Gateway machine.
- A Tyk Hybrid account. Click here for details on creating a Hybrid account.
Step 1: Get your credentials
- Go to https://admin.cloud.tyk.io and login with your new details.
- Click “Users” and select your name, you will see your RPC credentials, take note of these:
Step 2: Get Tyk installed
To get started with a hybrid node, ensure you have Docker installed, then run the following in the terminal:
For OS X users, open a CLI that can access the
docker command, and then:
curl "https://raw.githubusercontent.com/lonelycode/tyk-hybrid-docker/master/start.sh" -o "start.sh" chmod +x start.sh ./start.sh [PORT] [TYK-SECRET] [RPC-CREDENTIALS] [API CREDENTIALS]
For Linux users:
wget https://raw.githubusercontent.com/lonelycode/tyk-hybrid-docker/master/start.sh chmod +x start.sh sudo ./start.sh [PORT] [TYK-SECRET] [RPC-CREDENTIALS] [API CREDENTIALS]
The parameters explained:
PORT: The port for Tyk to listen on (usually 8080).
TYK-SECRET: The secret key to use so you can interact with your Tyk node via the REST API.
RPC-CREDENTIALS: Your organisation ID, this can be found in the Dashboard Users -> User section.
API-CREDENTIALS: Your Tyk Cloud API credentials – these can be found in the Users section of your dashboard.
TYK-SECRET should be a secret key you define so you can interact with your Tyk node programatically.
This command will start the Docker container and be ready to proxy traffic (you will need to check the logs of the container to make sure the login was successful).
Step 3: Check everything is working
To check if the node has connected and logged in, type:
sudo docker logs --tail=100 --follow tyk_hybrid
This will show you the log output of the hybrid container, if you don’t see any connectivity errors, and the log output ends something like this:
time="Jul 7 08:15:03" level=info msg="Gateway started (vx.x.x.x)" time="Jul 7 08:15:03" level=info msg="--> Listening on port: 8080"
Then the gateway has successfully started.
Upgrade the Hybrid Gateway
To upgrade your Hybrid Gateway to the latest version:
Step 1: Backup your Docker Container Configuration File
If you have modified your Docker container in the current version, you should take a backup of your
tyk.conf configuration file.
Step 2: Run the start.sh script again
start.sh script again as in Step 2 in the install section above.